Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Inglewood
Roof repair in Inglewood usually costs between $450 and $1,900 depending on what’s actually wrong, and most small to mid-size fixes can be completed in a single day once we’re on the roof. That number changes fast when an older Inglewood home needs decking upgrades, which we’ll explain below. If you’ve got a ceiling stain, lifted shingles after a Santa Ana event, or water showing up around a pipe boot, call us at (866) 282-5070 and we’ll walk you through what we’re likely to find before we even set foot on your ladder.
We work in Inglewood every week – from the 90302 flats near Rogers Park up through the 90305 streets east of Prairie – and we know what these roofs do when they get old. Our Roof Repair team approaches every job the same way: diagnose first, show you photos and measurements, then give you a written price before any material gets ordered. No pressure, no auto-replacement pitch. Rick Dunnigan built this company on the idea that a roofer should tell you what a roof actually needs, not what makes the biggest invoice.
Why Buena Park Roof Repair Is Inglewood’s Preferred Roof Repair Company
Inglewood homeowners call us because we specialize in exactly three things: repair, replacement, and inspection. We’re not a general contractor taking roofing jobs between kitchen remodels. That focus means our crews have seen thousands of aging Inglewood roofs – the wood shakes, the low-slope built-up systems, the 1x sheathing underneath – and we know what to look for before a small leak becomes a decking tear-out.
We work with seven major manufacturers – GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral – which means when we match a partial repair to your existing roof, we’re not forcing you into whatever shingle we happen to have in the yard. Matching matters more in Inglewood than almost anywhere else in the South Bay, because so many of these 1940s and 1950s roofs were built with materials that aren’t made the same way anymore. Having seven brands to reference gives us a real shot at a clean match instead of a visible patch.
Rick Dunnigan’s repair-first approach is the reason we get recommended between neighbors. If a roof can be fixed for $600, we’ll tell you that. If it needs a tear-off, we’ll show you why with photos and decking measurements – and you’ll get that scope in writing before any work starts. That’s the honest assessment Inglewood homeowners keep telling us they’ve been missing.
Styles & brands we work with
Metal Roof Repair in Inglewood
Metal Roof Repair in Inglewood typically runs $600 – $2,200, and the work usually involves re-securing lifted panels, replacing failed fasteners or neoprene washers, repairing seam separation, or re-flashing penetrations like vents and exhaust stacks. Inglewood’s Santa Ana wind events are hard on standing-seam and corrugated metal panels – fasteners back out over decades of thermal cycling, and a single lifted panel edge can start letting water in long before you see any stain on the ceiling. Most metal roof repairs on Inglewood homes are done the same day we get up there, unless the decking below the metal has rotted and needs to be opened up.
Fastener and panel re-securing
On older metal roofs over Inglewood’s mid-century homes, the most common call we get is for wind-lifted panels near the rake edges. The panels themselves are often fine – it’s the fasteners that have ovaled out or the neoprene washers that have hardened and cracked. We re-secure with correctly sized fasteners, replace degraded washers, and check the seam laps for hidden gaps before we come down.
Penetration re-flashing on metal roofs
Pipe boots, exhaust vents, and HVAC penetrations are the weak points on any metal roof, and Inglewood’s dry heat makes the rubber collars crack faster than you’d expect. We cut back and replace the flashing, tie in the new pieces with the existing panel profile, and make sure water sheets past the penetration instead of pooling around it.
Commercial Roof Repair in Inglewood
Commercial Roof Repair in Inglewood covers low-slope built-up roofs, modified bitumen, and some single-ply systems on the retail strips, apartment buildings, and mixed-use structures along Century, Manchester, and La Brea. Pricing for commercial roof repair in Inglewood generally starts around $850 for localized membrane patches and flashing work, with larger repairs on multi-tenant buildings running $2,500 – $7,500 depending on how much membrane needs to be cut out and replaced. Commercial roofs fail differently than residential ones – ponding water near clogged drains is a constant issue here, and a small split in the membrane around a drain collar can quietly wet insulation for months before anyone notices.
Membrane splits and drain collar repairs
Most commercial roof leaks we chase in Inglewood trace back to failed drain collars or membrane splits along curb joints. The fix is surgical: cut out the failed section, check the insulation below for water saturation, replace what’s compromised, and tie the new membrane into the existing system so water flows correctly.
Flashing repairs on parapet walls
Parapet walls on Inglewood’s older commercial buildings sag and crack over time, and the flashing that ties the roof membrane up the wall often separates at the transition. We re-secure, re-seal, and where needed re-fabricate the flashing so the transition stops taking water.
Trusted Brands We Service in Inglewood
We’re authorized to install and warranty products from seven manufacturers, and on Inglewood repair jobs we lean on whichever brand gives us the cleanest match to what’s already up there. IKO and CertainTeed lines show up constantly on the 1960s tract roofs around Darby Park and the streets west of the Forum. Atlas and Tamko shingles are common on homes that were re-roofed in the 1990s and early 2000s. And on the older wood-shake tear-offs where the homeowner wants a fire-rated architectural shingle, we often spec Owens Corning Duration or GAF Timberline depending on color and availability. The point is this: you choose your material, not us. We’ll show you two or three options that fit your roof and your budget, and we’ll explain the trade-offs without pushing you into the most expensive line.
Common Roof Repair Problems We See in Inglewood Homes
- Brittle original wood shakes failing at the fasteners. These 1940s and 1950s roofs were nailed directly to 1x sheathing, and after 60-plus years of thermal cycling, the fasteners loosen and the shakes crack. Walking them for an inspection is a skill in itself – too much weight and you create the very leak you came to find.
- Thin 1x skip sheathing that can’t hold modern fasteners. When you open an Inglewood roof to fix a leak, you often find decking that’s too thin or too gapped to re-nail architectural shingles onto. Fire and seismic code then triggers a decking upgrade, not a patch – and that’s exactly the scope creep that catches homeowners off guard.
- Lifted or missing flashing at penetrations. Pipe boots, vents, and chimney flashing on older Inglewood homes take a beating from Santa Ana winds and decades of sun. The rubber dries out, the metal lifts, and water finds its way into an attic that was never built with much ventilation to dry it out.
- No ice and water shield in the valleys. Most 1950s Inglewood tract homes were built without any membrane under the valley flashing. When the valley metal corrodes or separates, water rides straight through the sheathing and into the ceiling below. We see this pattern constantly in the 90302 and 90303 neighborhoods.
See the difference
Before
After
Before
After
Before
AfterPricing for Roof Repair in Inglewood, CA
Expect to pay $450 – $900 for most flashing repairs, vent boot replacements, and small shingle patches in Inglewood. Valley repairs with new underlayment run $700 – $1,400 depending on how much valley needs to be opened up. When we find decking that has to be replaced – which happens more often in Inglewood than almost anywhere else we work – the repair scope moves into the $1,800 – $4,500 range once the tear-off, decking, and new material are priced. A full decking tear-off and re-shingle on a typical 1,000 to 1,300 square foot Inglewood tract home runs $9,000 – $16,000 depending on material choice and how much rotted framing must be addressed. Call (866) 282-5070 for a free estimate, and we’ll give you a written line-item price before any work is authorized.
We Also Serve Cities Near Inglewood
Our Roof Repair in Inglewood crews regularly work in the surrounding South Bay and Westside communities. You’ll see us on roofs in Hawthorne, Del Aire, Lennox, and Alondra Park throughout the week, and we bring the same honest scoping and seven-brand material matching to every job.
Serving Inglewood, CA — Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Inglewood
Because the original mid-century construction was built with wood shakes nailed directly to 1x skip sheathing, and once you open that roof to fix a leak, strict fire and seismic codes require the decking to be brought up to current standards before new material goes on. A patch quote never anticipated that scope, which is why it surfaces after work has started. We handle it differently: inspection first, then a written allowance for decking and framing upgrades, and no surprise work without your written approval. Call (866) 282-5070 to schedule a roof inspection before committing to any repair scope.
Yes, and this is exactly the skill we’ve built over years of working on Inglewood’s older tract homes. Brittle wood shakes will crack under concentrated weight, so our techs use weight-distributing roof ladders and careful foot placement to move across the surface without causing new damage. We inspect before we walk, identify the most likely leak path, and minimize contact with the shakiest sections. Call (866) 282-5070 and we’ll schedule a walk-up that protects your roof while we diagnose it.
On a 1940s or 1950s Inglewood roof, opening the roof typically reveals a combination of thin 1x sheathing, rotted decking around the leak area, failed underlayment in the valleys, and sometimes outdated wiring or undersized framing that was never built for modern material weights. There is no ice and water shield, the fasteners are loose, and the decking may be too thin to hold new architectural shingles. We document all of it with photos, price the needed upgrades in writing, and get your approval before we touch anything.
It depends on how many panels or shingles lifted and whether the decking below is still sound. If it’s isolated lifting at the eaves or rakes, metal roof repair or shingle re-securing is usually enough – $600 to $1,400 for most Inglewood homes. If fasteners have failed across a third or more of the roof surface, or if the decking is thin 1x material that can’t be re-fastened, a full tear-off and decking upgrade may be the only way to code and to a roof that holds. We’ll show you photos and measurements, then let you decide with a written scope in hand. Call (866) 282-5070 for an honest assessment before you commit to any bid.
Ask each roofer what the quote actually includes: decking replacement allowance, underlayment type, flashing scope, and whether the price is fixed or can move once the roof is opened. A low bid that doesn’t mention decking upgrades on an Inglewood tract home is a bid that will change. We write allowances into our contracts, price every surprise in writing before work proceeds, and never change a job’s scope without your signature. Get our line-item estimate free by calling (866) 282-5070.
What Sets Us Apart in Inglewood
Here’s what we keep hearing from Inglewood homeowners: they’re tired of roofers who walk the roof, come down, and say it needs a full replacement without ever opening it up. Inglewood’s 1940s and 1950s tract homes were built with 1x sheathing boards and wood shakes nailed straight to them, so a repair that opens the roof to chase a leak often uncovers decking too thin to re-nail modern architectural shingles to. That’s not a sales pitch – it’s the structural reality of these homes, and it’s why the fire and seismic codes force a decking upgrade once the roof is opened. Neighboring Westchester and Culver City just don’t deal with this at the same scale, because their housing stock is newer and their codes were written for different construction. This decking-driven scope creep is an Inglewood pattern, and we’ve built our whole process around managing it honestly.
On a 1954 single-story in the 90302 flats, our tech went up to chase a ceiling stain and found the original wood-shake roof was failing at the fasteners after decades of thermal cycling – the shakes were so brittle that walking the roof without cracking them took careful weight distribution. Opening the roof exposed 1x skip sheathing and no ice and water shield in the valleys, so we priced the decking upgrade and new underlayment in writing as an allowance, got approval before touching anything, and rebuilt with new decking, drip edge, and architectural shingles. That’s how Rick Dunnigan’s inspection-first approach works: you know what you’re getting into before we pull the first nail.
When you call us for roof repair in Inglewood, you get an honest diagnosis, a written line-item price, and material options from seven manufacturers – not one brand and a hard upsell. Call (866) 282-5070 today to schedule your free estimate. We’ll tell you what the roof actually needs.
Written by Rick Dunnigan, Owner at Buena Park Roof Repair, serving Inglewood and the surrounding South Bay communities.